Serving the Fargo area  ·  (701) 491-7458  ·  Open Mon-Sun 7am-7pm
📞 (701) 491-7458 Free Quote

Metal Roofing in Argusville, ND (58005) · Local Professionals

Fargo Metal Roofing · Fast response in Argusville and the Fargo area · Free estimate 24h

✅ Metal Roofing Alliance Member 🛡️ Licensed & Insured 💸 Free Quote 24h 🕐 Mon-Sun 7am-7pm
+269Verified Reviews
10Years in Business
4.9 ★Google Rating
24/7Available
✅ No hidden fees💳 Cards accepted🛡️ Licensed & Insured✅ Metal Roofing Alliance Member

Argusville sits right up on the flat Red River Valley floor along I-29, a small Cass County town where machine sheds, Quonsets, and grain bins outnumber stoplights. The housing stock here is a mix of older farmhouses, red barns, and practical ranch homes, with lots that run long and open to the prairie wind. If you live here, you know the winter drill: heavy snow, ice dams at the eaves, and spring melt that has to go somewhere.

That is why homeowners and property managers in Argusville (58005) call Fargo Metal Roofing. We are based in Fargo and know the drive up I-29 well. Whether it is a leaky machine shed roof on a sugar beet farm or a wind-peeled panel on a ranch house, we bring metal roofing experience that fits the Red River Valley, not a coastal climate.

Metal Roofing in Argusville (58005)

Argusville properties face conditions that punish the wrong roof. The ground is dead flat, so drainage depends on grading and gutters, not slope away from the house. Open prairie wind hits machine sheds and barns broadside, and that is where we see fasteners back out and panels lift first. Snow sits on low-slope roofs and refreezes at the eaves, and ice dams are a common call. Older farmhouses and barns often have uneven roof lines and layers of old shingles, which affects whether a retrofit over shingles makes sense. We work on corrugated and ribbed panel roofs for agricultural buildings, standing seam for homes, and stone-coated steel where a more traditional look is wanted.

Our team serves Argusville and the surrounding Fargo area with installation, repair, and replacement. We are a Metal Roofing Alliance Member, fully insured with general liability and workers' compensation, and we handle both residential and commercial and agricultural metal roofing. That includes machine sheds, Quonsets, barns, and grain bins across the flat fields here.

Our services in Argusville

How a Job Works in Argusville

Step 1: You call (701) 491-7458 or request a free estimate. We schedule an on-site assessment, look at the roof, the fasteners, the flashing, and the drainage, and talk through options. For storm or wind damage, we start with a free inspection and document what we find for your insurance claim. We never promise coverage or suggest a deductible can be waived.

Step 2: We handle the work. That may mean a full metal roof replacement, a retrofit over existing shingles where code allows, or a targeted repair. In Argusville, access matters: long gravel drives, tight machine shed clearances, and open fields mean we plan staging and delivery. If your property is in a historic district or HOA, we coordinate on panel profile and color before ordering. We also confirm permit requirements with the local building department, since thresholds and inspections vary.

Step 3: We clean up and walk the job with you. Magnets sweep for screws, panels and scraps are hauled away, and we make sure gutters and downspouts are clear. You get a final walkthrough so you know exactly what was done and what to watch for.

Pricing in Argusville depends on the roof, access, condition, and urgency. As a ballpark, corrugated and ribbed panel roofing starts at $5.50 per square foot, metal roof installation at $8, standing seam at $10, and metal shingle or stone-coated steel at $9. Metal roof over shingles (retrofit) starts at $7 per square foot, and replacement at $9. Repairs and leak repairs start at $450, screw replacement and re-fastening at $750, flashing and chimney or skylight repair at $600, and snow guards and ice protection at $1,200. Gutters for metal roofs start at $9 per linear foot, and coating or painting at $2.50 per square foot. Commercial and agricultural metal roofing starts with a free estimate. The biggest cost factors are square footage, roof pitch and complexity, whether old layers must come off, and how quickly you need us. Call (701) 491-7458 for a free estimate.

✅ Metal Roofing Alliance Member, licensed and insured for work in Argusville and nearby areas.

My machine shed roof near the Argusville elevator is leaking at the fasteners. Can you fix that without replacing the whole roof?
Yes. Failed fasteners and separated seams are common on agricultural panel roofs here because of wind and freeze-thaw. We inspect the panels, replace screws with proper neoprene washers, re-fasten loose panels, and seal or replace flashing as needed. If the panels are too far gone, we will tell you and quote a replacement.
A storm just peeled back panels on my barn outside Argusville. How fast can you respond?
Call us at (701) 491-7458. We offer free storm and wind damage inspections and prioritize active leaks and open roofs. We document the damage for your insurance claim and can often make temporary repairs to stop water intrusion before the full fix.
What does a typical metal roof replacement cost for a ranch house in Argusville?
Most ranch homes here fall in a range based on square footage and complexity. Metal roof replacement starts at $9 per square foot, and standing seam at $10. A simple single-story ranch with good access is on the lower end; dormers, valleys, or multiple layers of old shingles push it up. We give a written free estimate after seeing the roof.
Do I need a permit for a new metal roof in Argusville?
Roofing permits are commonly required for a full replacement or re-roof, and rules vary by jurisdiction. We confirm requirements with the local building department before work starts. You can also check with the City of Argusville website (https://www.casscountynd.gov) for local contacts and general information.
My neighbor says my new metal roof panels overhang the property line. What should I do?
Property line issues are best resolved before installation. We set the roof plan to stay within your lot and can adjust panel overhang at the eaves. If your property is in an HOA, we help coordinate approval on panel profile and color. For boundary questions, check your plat or contact the city.
Are you insured for work on my Argusville property?
Yes. We are fully insured with general liability and workers' compensation coverage. We can provide proof of insurance before work begins so you are protected.
What maintenance does a metal roof need in Argusville to survive the winters?
Keep gutters and downspouts clear so spring melt drains away from the foundation. Check fasteners on agricultural panels each fall, since wind and freeze-thaw loosen them. Snow guards help prevent sudden snow slides, especially over doors and walkways. We offer inspections and can re-fasten or replace screws as needed.
Why choose us?

Trusted professionals in Fargo

🏅

Licensed contractors

Continuous training, professional equipment, meticulous and code-compliant work

🛡️

Licensed & Insured

Full coverage on all our job sites, no exceptions

⚡

Available Mon-Sun 7am-7pm

Emergencies, weekends, holidays: available when you need us

💰

100% Free Quote

Response within 24h, no commitment, by phone or form

Our services

Our Metal Roofing Services in Fargo

All your work handled by qualified professionals in Fargo

Metal Roof Installation

Complete metal roof systems engineered for your local climate and built to outlast three shingle roofs.

Included in your service

  • Deck inspection and repair before any panel goes on
  • High-temp synthetic underlayment and correct ridge and soffit ventilation
  • Manufacturer-certified panel, trim, and flashing details for the full warranty
  • Free on-site assessment and written estimate within 24h
Learn more→

Standing Seam Metal Roofing

Concealed-fastener standing seam: no exposed screws to loosen, leak, or need re-torquing.

Included in your service

  • Panels roll-formed to the exact length of your roof, no end laps
  • Mechanically seamed or snap-lock profiles with concealed clips
  • Floating clip system that lets panels expand and contract freely
  • Kynar 500 / PVDF finish in the full architectural color range
Learn more→

Metal Roof Replacement

Full tear-off of an end-of-life shingle, cedar, or metal roof, replaced with a complete new system.

Included in your service

  • Tear-off and haul-away of the old roofing, dumpster included
  • Decking inspected board by board, rot and soft spots replaced
  • New underlayment, drip edge, valleys, and penetration flashing throughout
  • Documentation of the finished system for your insurer or future buyer
Learn more→

Metal Roof Over Shingles (Retrofit)

Retrofit metal installed over sound existing shingles: no tear-off, less waste, lower cost.

Included in your service

  • Honest deck and shingle assessment first, recover only when it is the right call
  • Furring strips or slip sheet as the panel profile and local code require
  • Existing vents, pipe boots, and flashings reworked to the new roof plane
  • Straight guidance on when tear-off is the better long-term choice
Learn more→

Metal Roof Repair

Targeted repair of damaged, loose, or storm-hit metal roofing before it reaches your ceiling.

Included in your service

  • Bent, dented, or punctured panels replaced and color-matched
  • Seams, laps, and penetrations resealed with compatible butyl and sealant
  • Failed pipe boots, closures, and ridge cap fasteners renewed
  • Written findings with photos of what we found and what we fixed
Learn more→

Metal Roof Leak Repair

Priority leak response: we trace the leak to its real source instead of caulking the symptom.

Included in your service

  • Water testing and interior tracing to find the true entry point
  • Backed-out fasteners, separated seams, and flashing gaps corrected at the cause
  • Emergency tarping available same day after a storm
  • Attic and insulation moisture check so hidden damage does not sit and spread
Learn more→

Screw Replacement & Re-Fastening

The top cause of leaks on 15 to 30 year old screw-down roofs, fixed for a fraction of replacement.

Included in your service

  • Every fastener replaced with oversized screws and new EPDM sealing washers
  • Dried-out washers and stripped holes addressed panel by panel
  • Ridge, eave, and sidewall closures renewed at the same time
  • Restores a watertight roof without replacing sound panels
Learn more→

Corrugated & Ribbed Panel Roofing

Corrugated, tuff-rib, and 5V panel roofing: the budget-friendly workhorse for homes and outbuildings.

Included in your service

  • Galvalume and painted steel panels cut to length on site
  • Correct screw pattern and torque so washers seat without over-driving
  • Foam and metal closures at ridge, eave, and rake to keep weather and pests out
  • Full color range for homes, cabins, barns, and workshops
Learn more→

Metal Shingle Roofing

The look of architectural shingle, slate, or shake with the lifespan and wind rating of steel.

Included in your service

  • Interlocking stamped steel or aluminum shingle panels
  • Walkable finished surface, easier to service than a standing seam field
  • Lightweight enough for retrofit over an existing roof structure
  • Profiles and colors that suit historic and HOA-governed neighborhoods
Learn more→

Stone-Coated Steel Roofing

Steel strength under a textured stone finish, with strong hail and wind performance.

Included in your service

  • Acrylic-bonded stone granule surface over structural steel
  • Battened or direct-to-deck installation depending on the profile
  • Class A fire rating and high impact resistance ratings
  • Tile, shake, and shingle textures for suburban and coastal homes alike
Learn more→

Copper & Specialty Metal Roofing

Copper, zinc, and aluminum for porches, bay windows, dormers, and full architectural roofs.

Included in your service

  • In-house fabrication of pans, valleys, and custom curved details
  • Soldered seams and joints where the detail calls for it
  • Isolation of dissimilar metals to prevent galvanic corrosion
  • A living patina that develops over decades of service
Learn more→

Metal Roof Coating & Painting

Restoration for faded, chalking, or surface-rusted metal, adding 10 to 15 years without replacement.

Included in your service

  • Wash, degrease, and mechanical prep of the entire panel surface
  • Rust treatment and primer on affected areas before topcoat
  • High-performance elastomeric or silicone coating system applied to spec
  • Honest assessment first: we say so when the roof is past coating
Learn more→

Flashing, Chimney & Skylight Repair

Flashing is the number one leak point on any metal roof, and it is what we fabricate best.

Included in your service

  • Custom bent step, counter, and apron flashing made in-house
  • Chimney crickets to shed water on the uphill side
  • Skylight curbs and head flashing rebuilt to the panel profile
  • Valley and wall transition details closed with matching trim
Learn more→

Snow Guards & Ice Protection

Snow retention that stops rooftop avalanches onto decks, gutters, walkways, and entryways.

Included in your service

  • Pad-style guards or continuous rail systems matched to your panel
  • Layout calculated from roof pitch, panel length, and local snow load
  • Clamp-on mounting on standing seam, no panel penetrations
  • Ice dam and eave detailing for higher-elevation homes
Learn more→

Storm & Wind Damage Repair

Wind, hail, and fallen-limb repair with thorough documentation and a straight repair-or-replace answer.

Included in your service

  • Free post-storm inspection with dated photo documentation
  • Emergency tarping and temporary weatherproofing when needed
  • A written report you can use when documenting your insurance claim
  • Honest assessment of repair versus replacement, with no pressure either way
Learn more→

Metal Roof Inspection

A written, no-obligation assessment of fastener condition, seams, flashing, and remaining service life.

Included in your service

  • Fastener, washer, and seam condition checked across the field
  • Flashing, penetrations, and closures inspected point by point
  • Coating wear, chalking, and corrosion graded panel by panel
  • Written report with photos and a straight answer on years remaining
Learn more→

Gutters for Metal Roofs

Gutters sized and hung correctly for metal roofing, where standard hangers and spacing do not work.

Included in your service

  • Seamless aluminum or half-round systems formed on site
  • Hanger placement and spacing matched to the panel profile
  • Oversized capacity and downspouts sized for heavy regional rainfall
  • Bracket spacing tightened for high-wind zones so storms do not tear the gutter off
Learn more→

Commercial & Agricultural Metal Roofing

Barns, workshops, churches, and light commercial metal roofing across the county.

Included in your service

  • Long-run panels for wide spans and low-slope structures
  • Purlin and framing attachment detailed for the building type
  • Insulation, vapor barrier, and condensation control options
  • Repairs and re-fastening for aging agricultural metal buildings
Learn more→
Verified client reviews

269+ Verified Client Reviews in Fargo

⭐⭐⭐⭐⭐ 4.9/5 · 269 verified Google reviews

Free Quote

Get Your Free Quote

Metal Roofing in Fargo · Response within 24h · No commitment · ☎ (701) 491-7458

Your Free Quote Request

Confidential · Response within 24h

✅ Free personalized estimate ⚡ Response within 24h 🛡️ Licensed & Insured 📍 On-site visits included in Fargo ✅ No hidden fees 🕐 Available Mon-Sun 7am-7pm