Serving the Fargo area  ·  (701) 491-7458  ·  Open Mon-Sun 7am-7pm
📞 (701) 491-7458 Free Quote

Metal Roofing in Harwood, ND (58042) · Local Professionals

Fargo Metal Roofing · Fast response in Harwood and the Fargo area · Free estimate 24h

✅ Metal Roofing Alliance Member 🛡️ Licensed & Insured 💸 Free Quote 24h 🕐 Mon-Sun 7am-7pm
+269Verified Reviews
10Years in Business
4.9 ★Google Rating
24/7Available
✅ No hidden fees💳 Cards accepted🛡️ Licensed & Insured✅ Metal Roofing Alliance Member

Harwood sits just north of Fargo where the prairie opens up and the wind hits hard. Most homes here are ranch styles and newer two-story builds on generous lots, with a few farmsteads and shops mixed in along the county roads. If your roof faces the open ground north of town, it takes a beating that sheltered Fargo neighborhoods never see.

That is why homeowners in Harwood (58042) call Fargo Metal Roofing. We know how loose trim and lifted panel edges show up after a northwest blow, and we have replaced enough wind-torn shingles and fasteners on this side of Cass County to spot the trouble before it turns into a leak.

Metal Roofing in Harwood (58042)

Harwood is flat Red River Valley ground, and that flatness matters. Water does not run off fast, so roof pitch and flashing details have to be right the first time. North of the city limits the shelterbelts thin out and open-prairie wind lifts loose edges, ridge caps, and trim on older ranch homes and machine sheds. We see ice dams at the eaves on taller two-story houses after a hard winter, and hail pits on older panels that have lost their coating. Lots here are wide enough for staging, but tight driveways and detached shops mean we plan material drops carefully so we are not blocking your neighbor's approach.

Our team serves Harwood and the surrounding Fargo area with installation, repair, and full replacement. We are a Metal Roofing Alliance Member, fully insured with general liability and workers' compensation, and we handle everything from standing seam on a new build to screw replacement on a weathered ag building.

Our services in Harwood

How a Job Works in Harwood

Step 1: You call (701) 491-7458 or request a free estimate. We schedule an on-site assessment, walk the roof and the attic if needed, and check fasteners, seams, flashing, and gutters. You get a written scope with pricing before any work starts.

Step 2: We pull the required roofing permit through the local building department and confirm any HOA or historic review that applies. On Harwood jobs we watch the weather window closely, because open-prairie wind can shut down panel work fast. Crews are insured and trained on retrofit over shingles and storm damage repairs, and we protect landscaping and siding while panels go up.

Step 3: We clean the site, magnet-sweep for screws and metal shavings, and walk the finished roof with you. You get photos of the completed work and a clear explanation of what was repaired or replaced.

Pricing in Harwood depends on roof size, pitch, access, and condition. As a ballpark, metal roof installation starts at $8 per square foot, standing seam at $10, metal roof replacement at $9, and retrofit over existing shingles at $7. Corrugated and ribbed panel roofing starts at $5.50 per square foot, while stone-coated steel and metal shingle systems start at $9. Repairs and leak calls start at $450, screw replacement and re-fastening at $750, flashing and chimney work at $600, and snow guards at $1,200. Gutters for metal roofs start at $9 per linear foot. Storm and wind damage inspections are free, and urgency, roof height, and how much decking needs repair can move the number. Call (701) 491-7458 for a free estimate.

✅ Metal Roofing Alliance Member, licensed and insured for work in Harwood and nearby areas.

My ranch home north of Harwood takes full prairie wind. What fails first on a metal roof?
On exposed Harwood properties, the wind typically works on fasteners, ridge caps, and edge trim first. Loose screws back out, sealant washers dry out, and panel edges start to flutter. We check those areas closely and re-fasten or replace hardware before a small lift becomes a peeled panel.
A storm just peeled back panels on my shop near Harwood. How fast can you get out?
Call (701) 491-7458 and describe the damage. We prioritize active leaks and wind-lifted panels, and we can often get an inspection scheduled quickly depending on storm volume. We document the damage for your insurance claim, though coverage decisions rest with your carrier.
What does a typical metal roof replacement cost for a Harwood ranch house?
Most Harwood ranch replacements fall in the range of $9 to $10 per square foot for the roofing portion, so a typical single-story home often lands in the low-to-mid five figures before extras. Size, pitch, decking condition, and whether we remove existing shingles all affect the final number.
Do I need a permit to re-roof my Harwood home, and who issues it?
Roofing permits are commonly required for a full replacement or re-roof in Cass County, and thresholds and inspection requirements vary. We verify the current rules with the local building department before work begins. You can also check the City of Harwood website at https://www.casscountynd.gov for local information.
My neighbor says my new metal roof panels cross the property line. What should I do?
Property line disputes are best settled before installation. We set panels within the roof footprint and follow setback rules, but if a survey or neighbor concern comes up, we coordinate with you and pause work until it is resolved. HOA architectural review, if you have one, is handled before materials are ordered.
Are your crews covered by insurance when working on my Harwood property?
Yes. We carry general liability and workers' compensation coverage, and we can provide proof of insurance before work starts. That protects you if a crew member is injured or property is damaged on your Harwood job.
What maintenance should Harwood homeowners do before winter?
Before the first hard freeze, clear gutters, check that snow guards are secure, and look for loose fasteners or lifted trim on the windward side. Ice dams at the eaves are common on taller homes here, so we also inspect attic insulation and ventilation. A fall inspection now prevents a spring leak call.
Why choose us?

Trusted professionals in Fargo

🏅

Licensed contractors

Continuous training, professional equipment, meticulous and code-compliant work

🛡️

Licensed & Insured

Full coverage on all our job sites, no exceptions

⚡

Available Mon-Sun 7am-7pm

Emergencies, weekends, holidays: available when you need us

💰

100% Free Quote

Response within 24h, no commitment, by phone or form

Our services

Our Metal Roofing Services in Fargo

All your work handled by qualified professionals in Fargo

Metal Roof Installation

Complete metal roof systems engineered for your local climate and built to outlast three shingle roofs.

Included in your service

  • Deck inspection and repair before any panel goes on
  • High-temp synthetic underlayment and correct ridge and soffit ventilation
  • Manufacturer-certified panel, trim, and flashing details for the full warranty
  • Free on-site assessment and written estimate within 24h
Learn more→

Standing Seam Metal Roofing

Concealed-fastener standing seam: no exposed screws to loosen, leak, or need re-torquing.

Included in your service

  • Panels roll-formed to the exact length of your roof, no end laps
  • Mechanically seamed or snap-lock profiles with concealed clips
  • Floating clip system that lets panels expand and contract freely
  • Kynar 500 / PVDF finish in the full architectural color range
Learn more→

Metal Roof Replacement

Full tear-off of an end-of-life shingle, cedar, or metal roof, replaced with a complete new system.

Included in your service

  • Tear-off and haul-away of the old roofing, dumpster included
  • Decking inspected board by board, rot and soft spots replaced
  • New underlayment, drip edge, valleys, and penetration flashing throughout
  • Documentation of the finished system for your insurer or future buyer
Learn more→

Metal Roof Over Shingles (Retrofit)

Retrofit metal installed over sound existing shingles: no tear-off, less waste, lower cost.

Included in your service

  • Honest deck and shingle assessment first, recover only when it is the right call
  • Furring strips or slip sheet as the panel profile and local code require
  • Existing vents, pipe boots, and flashings reworked to the new roof plane
  • Straight guidance on when tear-off is the better long-term choice
Learn more→

Metal Roof Repair

Targeted repair of damaged, loose, or storm-hit metal roofing before it reaches your ceiling.

Included in your service

  • Bent, dented, or punctured panels replaced and color-matched
  • Seams, laps, and penetrations resealed with compatible butyl and sealant
  • Failed pipe boots, closures, and ridge cap fasteners renewed
  • Written findings with photos of what we found and what we fixed
Learn more→

Metal Roof Leak Repair

Priority leak response: we trace the leak to its real source instead of caulking the symptom.

Included in your service

  • Water testing and interior tracing to find the true entry point
  • Backed-out fasteners, separated seams, and flashing gaps corrected at the cause
  • Emergency tarping available same day after a storm
  • Attic and insulation moisture check so hidden damage does not sit and spread
Learn more→

Screw Replacement & Re-Fastening

The top cause of leaks on 15 to 30 year old screw-down roofs, fixed for a fraction of replacement.

Included in your service

  • Every fastener replaced with oversized screws and new EPDM sealing washers
  • Dried-out washers and stripped holes addressed panel by panel
  • Ridge, eave, and sidewall closures renewed at the same time
  • Restores a watertight roof without replacing sound panels
Learn more→

Corrugated & Ribbed Panel Roofing

Corrugated, tuff-rib, and 5V panel roofing: the budget-friendly workhorse for homes and outbuildings.

Included in your service

  • Galvalume and painted steel panels cut to length on site
  • Correct screw pattern and torque so washers seat without over-driving
  • Foam and metal closures at ridge, eave, and rake to keep weather and pests out
  • Full color range for homes, cabins, barns, and workshops
Learn more→

Metal Shingle Roofing

The look of architectural shingle, slate, or shake with the lifespan and wind rating of steel.

Included in your service

  • Interlocking stamped steel or aluminum shingle panels
  • Walkable finished surface, easier to service than a standing seam field
  • Lightweight enough for retrofit over an existing roof structure
  • Profiles and colors that suit historic and HOA-governed neighborhoods
Learn more→

Stone-Coated Steel Roofing

Steel strength under a textured stone finish, with strong hail and wind performance.

Included in your service

  • Acrylic-bonded stone granule surface over structural steel
  • Battened or direct-to-deck installation depending on the profile
  • Class A fire rating and high impact resistance ratings
  • Tile, shake, and shingle textures for suburban and coastal homes alike
Learn more→

Copper & Specialty Metal Roofing

Copper, zinc, and aluminum for porches, bay windows, dormers, and full architectural roofs.

Included in your service

  • In-house fabrication of pans, valleys, and custom curved details
  • Soldered seams and joints where the detail calls for it
  • Isolation of dissimilar metals to prevent galvanic corrosion
  • A living patina that develops over decades of service
Learn more→

Metal Roof Coating & Painting

Restoration for faded, chalking, or surface-rusted metal, adding 10 to 15 years without replacement.

Included in your service

  • Wash, degrease, and mechanical prep of the entire panel surface
  • Rust treatment and primer on affected areas before topcoat
  • High-performance elastomeric or silicone coating system applied to spec
  • Honest assessment first: we say so when the roof is past coating
Learn more→

Flashing, Chimney & Skylight Repair

Flashing is the number one leak point on any metal roof, and it is what we fabricate best.

Included in your service

  • Custom bent step, counter, and apron flashing made in-house
  • Chimney crickets to shed water on the uphill side
  • Skylight curbs and head flashing rebuilt to the panel profile
  • Valley and wall transition details closed with matching trim
Learn more→

Snow Guards & Ice Protection

Snow retention that stops rooftop avalanches onto decks, gutters, walkways, and entryways.

Included in your service

  • Pad-style guards or continuous rail systems matched to your panel
  • Layout calculated from roof pitch, panel length, and local snow load
  • Clamp-on mounting on standing seam, no panel penetrations
  • Ice dam and eave detailing for higher-elevation homes
Learn more→

Storm & Wind Damage Repair

Wind, hail, and fallen-limb repair with thorough documentation and a straight repair-or-replace answer.

Included in your service

  • Free post-storm inspection with dated photo documentation
  • Emergency tarping and temporary weatherproofing when needed
  • A written report you can use when documenting your insurance claim
  • Honest assessment of repair versus replacement, with no pressure either way
Learn more→

Metal Roof Inspection

A written, no-obligation assessment of fastener condition, seams, flashing, and remaining service life.

Included in your service

  • Fastener, washer, and seam condition checked across the field
  • Flashing, penetrations, and closures inspected point by point
  • Coating wear, chalking, and corrosion graded panel by panel
  • Written report with photos and a straight answer on years remaining
Learn more→

Gutters for Metal Roofs

Gutters sized and hung correctly for metal roofing, where standard hangers and spacing do not work.

Included in your service

  • Seamless aluminum or half-round systems formed on site
  • Hanger placement and spacing matched to the panel profile
  • Oversized capacity and downspouts sized for heavy regional rainfall
  • Bracket spacing tightened for high-wind zones so storms do not tear the gutter off
Learn more→

Commercial & Agricultural Metal Roofing

Barns, workshops, churches, and light commercial metal roofing across the county.

Included in your service

  • Long-run panels for wide spans and low-slope structures
  • Purlin and framing attachment detailed for the building type
  • Insulation, vapor barrier, and condensation control options
  • Repairs and re-fastening for aging agricultural metal buildings
Learn more→
Verified client reviews

269+ Verified Client Reviews in Fargo

⭐⭐⭐⭐⭐ 4.9/5 · 269 verified Google reviews

Free Quote

Get Your Free Quote

Metal Roofing in Fargo · Response within 24h · No commitment · ☎ (701) 491-7458

Your Free Quote Request

Confidential · Response within 24h

✅ Free personalized estimate ⚡ Response within 24h 🛡️ Licensed & Insured 📍 On-site visits included in Fargo ✅ No hidden fees 🕐 Available Mon-Sun 7am-7pm